0000Renk Electric USA000000 RENK ELECTRIC INC. 000000Renk Electric USA0000
Renk Electric logo EST. 1985
Celebrating Over 30 Years Of Providing Electrical Services To The Region

 
204 Camars Drive ¤  PO Box 290 ¤ Warminster, PA 18974-0529

Follow us on Facebook
Phone: 215-443-9777
Email:  Renk Electric
Generac Generators    MAIN    CONTACT US    SERVICES    NEWS    FEEDBACK    QUESTIONS    SHOWCASE    PAYMENTS    CHARITIES    EMPLOYMENT

 

Generac Generators

GENERAC Power Washers

Generac Generators

GENERAC Portable Generator

Generac Generators

GENERAC Portable Generator

Generac Generators

GENERAC Maintenance Kit

Generac Generators

Generac Generator Installation

GENERAC Guardian Generators
Pre-Storm Checklist

 

Scroll Down To Find Your Generator

Generac 8KW-20KW
8KW-20KW

1. Insert the Generac Generator key into the key slot on either end of the generator and turn towards the back of the generator until the lock is completely vertical.
2. Lift the lid of the generator until hinges hold the lid open.
3. Look at the control board in the right hand corner notice the LCD display should read the CURRENT TIME and DATE and the message should read "READY TO RUN".
4. If the LCD display reads anything but the above, please do not hesitate to give us a call.
Generac 8KW-20KW Generator

"R" Panel

Generac Non Nexus 22KW-80KW Liquid Cooled
22KW-80KW Liquid Cooled

1. Locate gas pipe connection into generator, that is the front of generator and the control panel is behind the front door.
2. Insert key into lock and turn counter clockwise to unlock door.
3. Door will open towards you.
4. In the top left hand corner of the generator behind the door is the control board.
5. For NON Nexus Control Board there is a series of indicator lights. The light that should be on is the "green" light reading "SYSTEM READY".
6. If any other lights are illuminated please do not hesitate to call us.
7. For NEXUS Control Board the LCD display should read CURRENT TIME and DATE and the message should read "READY TO RUN".
8. If there is anything else displayed but what was listed above please do not hesitate to call us.
Generac Non Nexus 22KW-80KW Liquid Cooled Generator

Generac Nexus 22KW-80KW Liquid Cooled
22KW-80KW Liquid Cooled

1. Locate gas pipe connection into generator, that is the front of generator and the control panel is behind the front door.
2. Insert key into lock and turn counter clockwise to unlock door.
3. Door will open towards you.
4. In the top left hand corner of the generator behind the door is the control board.
5. For NON Nexus Control Board there is a series of indicator lights. The light that should be on is the "green" light reading "SYSTEM READY".
6. If any other lights are illuminated please do not hesitate to call us.
7. For NEXUS Control Board the LCD display should read CURRENT TIME and DATE and the message should read "READY TO RUN".
8. If there is anything else displayed but what was listed above please do not hesitate to call us.
Generac Nexus 22KW-80KW Liquid Cooled Generator

Generac Evolution
GENERAC Evolution

1. Insert the Generac Generator key into the key slot on either end of the generator and turn towards the back of the generator until the lock is completely vertical.
2. Lift the lid of the generator until hinges hold the lid open.
3. Look at the control board in the right hand corner notice the LCD display should read the CURRENT TIME and DATE and the message should read "READY TO RUN". The "Auto" button should be illuminated green.
4. If the LCD display reads anything but the above, please do not hesitate to give us a call.
Generac Nexus 22KW-80KW Liquid Cooled Generator

For installation information and quotes, Call Renk Electric Inc. at 215-443-9777 today!

For additional information on Generac generators, visit Generac.com

 

 

Back To Renk Electric Generac Generators
Copyright © 2001-2017
Renk Electric Inc.
Last modified: 05/2017